Universal Process Controllers

UNIVERSAL PROCESS CONTROLLERS

Features

•  Low cost, Effective, Easy to use PID Temperature Controller
• 4 Digits Dual Row Display (4-Digits for PV & 4-Digits for SV)
• Selectable sensor input (T/C : J, K,R,S & RTD) from keyboard
• Programmable Lower & Upper set point limits
• Programmable control action ON-OFF/T.P control
•  Programmable hysteresis in ON-OFF mode
•  Programmable time delay to activate output in ON-OFF mode
•  Selectable heat/cool logic in ON-OFF control mode
• User selectable Relay Or SSR Drive Output
• Program lock function (To prevent unauthorized tampering)
• Universal supply voltage ranges from 90 To 270 VAC
•  Available in 5 Standard DIN sizes

 

Specification

Series		AI-5X81
Display
	Type	7 Segment LED
	No. of Digit	4 Digit Single Row
	LED Indication	Output Status
	Display height	Table No.1
Input Specification
Measurement
	Input	Thermocouple J, K, R, S; RTD: pt-100
	Indication Accuracy	0.3% FS
	Resolution	J, K, R, S : 1C RTD : 1C / 0.1 C
Output Specification
Set Points
	No. of Set Points	1
	SP Range Limit	J : 0 to 760 C K : -99 to 1200 C R : 0 to 1700 C S : 0 to 1700 C RTD : -100 to 450 C RTD.1 : -99.9 to 450.0 C
Output 1
	Relay / SSR Drive	User Selectable
	Relay Contact Rating	5 A  250 VAC/30 VDC resistive
	SSR Drive	12 VDC  50 mA
Functional Specification
Control Action		T.P or ON/OFF
Control Parameter
	Hysteresis	J, K, R, S, RTD : 1 to 99 C RTD.1: 0.1 to 99.9 C
	Delay	0 to 500 Sec
	Proportional Band	0.5 to 99.9C
	Cycle Time	0.5 to 100.0 Sec
	Aux. Control	Absolute / Deviation
General Specification
Supply Voltage
	90 - 270 VAC/DC
	24 VAC/DC (OPTIONAL)
Temperature
	Operating	0 - 50C
	Storage	-20 to 75C
Humidity (Non-condensing)	95 % RH
Dimensions & Weight	Table no : 2