TIMER KEYBOARD BASED KTM-XX3 Series

Request to Call Back Send Inquiry

Product Description

Low cost, Effective, Easy to use Keyboard based Digital timer

Programmable timer start modes to suit various applications

Programmable Up/Down counting

Programmable Front Reset

Programmable Output 2 functions : Auxiliary contact/End of cycle/Instant contact

Multiple Time Range: From 0.01 Sec. to 999 Hrs.

Time Setting via keyboard

Configuration at power on (To prevent unauthorized tampering)

Available in 5 Standard DIN sizes

3-Digit display

Programmable ON Delay/Interval/Cyclic/Forward-Reverse mode

Programmable Auto Reset/Latch Output

Programmable Memory Backup

High Accuracy: 0.05% of Full scale (Repeat Accuracy: 0.01%)

Time base selection via keyboard

Independent time base for both cycles in Cyclic mode

Universal supply voltage ranges from 90 To 270 VAC

KTM-3D
Series		Economical keyboard Counter
Display	Type	7 segment LED
	No. of Digits	4 Digits, Single Row
	LED Indication	Output Status ; Batch/AR Time
	Dimensions	Table no : 1
Input Specification
Start Input		Power On, Pulse (Edge Trigger),Front Start (Programmable)
Reset Input		Front Key & Rear Terminal (Potential free)
Accuracy		Setting : 0.05% of Full scale Repeat : 0.01%
Output Specification
No. Of Outputs		2
Output 1	Relay / SSR	Factory settings
	Relay Contact Rating	5 A @ 250V AC/30V DC resistive
	SSR	12 VDC @ 50mA
Output 2	Relay / SSR	Factory settings
	Relay Contact Rating	5 A @ 250V AC/30V DC resistive
	SSR	12 VDC @ 50mA
Configuration Parameters
Delay Modes		On Delay/Interval/Cyclic ON time first/Cyclic OFF time first/Cyclic Hold-Forward-Hold-Reverse-Hold
Time Range		9.99 Sec ; 99.9 Sec ; 999 Sec
		9.59 Min : Sec
		99.9 Min ; 999 Min
		9.59 Hrs : Min
		99.9 Hrs ; 999 Hrs
Timer Start Modes		Power On Start
		Pulse Start (Edge Triggered)
		Front Start Pulse Start (Edge +Level )
Programmable No. of Cycle		Applicable in On delay/Off delay CY1 & CY2 Mode Only
Timing Accuracy		0.05 % Full scale
Time Base Selection		Through Keyboard
Front Panel Reset		Enable/Disable
Memory Backup		Enable/Disable
Output 2 Configurable		Auxiliary Contact
Output 2 Configurable		Batch Mode
General Specification
Supply Voltage		90 - 270 VAC/DC
Supply Voltage		24 VAC/DC (OPTIONAL)
Temperature	Operating	0 - 50°C
	Storage	-20° to 75°C
Humidity (Non-condensing)		95 % RH
		Weight